Repair manual

RD 27 Disassembly and Assembly
wc_tx001221gb.fm 147
8.26 Removing and Installing the Hydraulic Reservoir
Prerequisites  Machine shut down
 Fuel tank removed
Removal Perform the procedure below to remove the hydraulic oil tank.
1. Remove the fuel tank. See Topic Removing and Installing the Fuel Tank.
2. Remove the screw (z) and loosen the hose clamp (a).
3. Disconnect the air filter indicator (b) and remove the air cleaner assembly (c)
from the machine.
4. Disconnect the wiring (d) for the low-level sensor.
5. Mark, then remove all the hydraulic hoses (e).
This procedure continues on the next page.