Repair manual

Disassembly and Assembly RD 27
wc_tx001221gb.fm 142
8.24 Removing and Installing the Steering Pump
Prerequisites  Machine turned to the left
 Machine shut down
Removal Perform the procedure below to replace the steering pump.
1. Turn the steering wheel to the left. This will provide improved access to the
steering cylinder (a) and other components.
2. Stop the machine and disconnect the battery.
3. Remove the suction hose (b) from the steering pump (c). Dispose of spilled
hydraulic oil in accordance with local environmental protection policies.
4. Disconnect the output hose (d).
This procedure continues on the next page.