Repair manual

RD 27 Disassembly and Assembly
wc_tx001221gb.fm 137
Continued from the previous page.
Installation Perform the procedure below to install the water tank.
1. Position the tank (h) into the machine frame.
2. Reconnect the water line between the tank and the filter at the filter (g).
3. Secure the operator platform to the machine using five screws (e).
This procedure continues on the next page.
WARNING
Safety hazard. The ROPS is designed to protect the operator in a rollover accident.
f Do not use the machine without the ROPS in place.