Repair manual

RD 27 Disassembly and Assembly
wc_tx001221gb.fm 135
8.21 Removing and Installing the Water Tank
Prerequisites  Machine shut down
 Crane capable of lifting 226 kg (500 lb)
Removal Perform the procedure below to remove the water tank.
1. Stop the engine and disconnect the battery.
2. Drain the water tank.
3. Make sure all four locking pins (a) of the ROPS are in good shape and securely
held in place by the retaining pins (b).
4. Secure the ROPS with a suitable crane and sling.
5. Remove the six bolts (d) securing the ROPS and remove the spacers (c).
This procedure continues on the next page.