Repair manual

Disassembly and Assembly RD 27
wc_tx001221gb.fm 124
Continued from the previous page.
5. Remove the two pins (c and d).
6. Remove the washer (e).
7. Push the piston (ram) into the cylinder.
8. Moving the cylinder toward the front of the machine, manuever the steering
cylinder (a) out of the machine.
Installation Perform the procedure below to install the steering cylinder.
1. Moving the steering cylinder from the front of the machine to the back of the
machine, position the steering cylinder inside the machine frame.
This procedure continues on the next page.