Repair manual

RD 27 Disassembly and Assembly
wc_tx001221gb.fm 121
Continued from the previous page.
8. Remove the fasteners (f).
9. Split the shroud and remove each half (g).
10.Disconnect the lower hose (h).
11.Remove the fasteners (i) that secure the radiator and remove the radiator (j).
Installation Perform the procedure below to install the radiator.
1. Position the radiator (j) into the machine and secure it with fasteners (i).
2. Connect the lower hose (h).
This procedure continues on the next page.