Repair manual

Safety Information RD 27
wc_si000247gb.fm 12
1.4 Guidelines for Service Safety
Precautions  To reduce the risk of personal injury, read and understand the service
procedures before performing any service to the machine.
 Some service procedures require that the machine’s battery be disconnected.
 All adjustments and repairs MUST be completed before operation. NEVER
operate the machine with a known problem or deficiency! All repairs and
adjustments should be completed by a qualified technician.
 Turn the engine off before performing maintenance or making repairs.
 Secure the articulated steering joint using the locking bar before lifting, jacking,
and servicing the machine. Machine halves could swing together unexpectedly
and cause a serious injury.
Accessories,
safety
devices, and
modifications
 Do not modify, weld, or drill safety frames (ROPS) fitted as original equipment.
 Do not loosen or remove bolts.
 Do not weld, drill, or modify a broken safety frame.
 Do not modify the machine without the express written approval of the
manufacturer.
Replacing
parts and
labels
 Replace worn or damaged components.
 Use only spare parts recommended by Wacker.
 Replace all missing and hard-to-read labels. Labels provide important
operating instructions and warn of dangers and hazards.
 Check all external fasteners at regular intervals.
Lifting and
transporting
When lifting the machine:
 Make sure slings, chains, hooks, ramps, jacks and other types of lifting devices
are attached securely and have enough weight-bearing capacity to lift or hold
the machine safely.
 Remain aware of the location of other people when lifting the machine.
To reduce the possibility of injury:
 Do not stand under the machine while it is being hoisted or moved.
 Do not get onto the machine while it is being hoisted or moved.