Repair manual

RD 27 Disassembly and Assembly
wc_tx001221gb.fm 113
8.10 Removing and Installing Drum Shock Mounts
Prerequisites  Drum removed from machine
 Special shock mount removal tool
 Loctite
®
243 or equivalent
Background Inspect the shockmounts on both sides of the drum (drive-side and exciter-side). If
one shockmount needs replacing, replace all the shockmounts on that side.
The procedure for removing drive-side shock mounts (a) is the same for removing
exciter-side shock mounts (b).
Removal Perform the procedure below to remove the shock mounts
1. Using the special tool (c), remove the shock mounts from the drum.
Installation 1. Using the special tool and Loctite 243 or equivalent, install the shockmounts to
the drum and/or the support plate.