Repair manual

Disassembly and Assembly RD 27
wc_tx001221gb.fm 112
Continued from the previous page.
4. Coat the grease seal (d) with a thin film of grease. Insert the seal, groove side
first, into the exciter-side bearing flange. Press the outer bearing race (c) into
the flange. Pack the bearing with 60 grams (2 oz.) of grease. Add the grease
retainer (b) and the retaining ring (a).
5. Press the outer bearing race (f) into the drive-side bearing flange. Pack the
bearing with 60 grams (2 oz.) of grease.
6. Install the grease retainer and the retaining ring.
Result The exciter shaft bearings have now been installed.