Repair manual

RD 27 Disassembly and Assembly
wc_tx001221gb.fm 103
Continued from the previous page.
3. Reattach the hydraulic fittings (f and g); however, at this time hand tighten the
hydraulic fittings only.
4. Connect the two hydraulic hoses (d and e).
5. Connect the case drain hose (c).
6. Tighten all the hydraulic fittings.
7. Install the hose clamps (b).
8. Install the hose protective cover (a).
Result The exciter motor has now been installed.