Repair manual

Disassembly and Assembly RD 27
wc_tx001221gb.fm 100
Continued from the previous page.
3. Using the five screws (h) install the shock mount support plate (i).
4. With the shims and spacer in place, slide the drum support over the pins
installed during removal. Using screws (e) install the drum support to the frame.
5. Using screws (a
1
, a
2
, a
3
, a
4
, a
5
), install the shock mount to the machine.
6. Connect the hydraulic hoses.
7. Install the hose cover protective plate (b).
I.
Result The drive motor has now been replaced.