Operator`s manual

RD 27 Maintenance
wc_tx000426gb.fm 59
5.12.19 Install hydraulic tank filler cap (c).
Hydraulic oil filter change
5.12.20 Stop the machine, apply the parking brake and switch off the engine.
5.12.21 Open the engine hood.
5.12.22 Unscrew the old filter cartridge (f) keeping a plastic bag over the
cartridge to contain any oil loss.
5.12.23 Oil the seal of the new filter.
5.12.24 Install the new filter and tighten by hand. When the seal contacts the
base, tighten the filter an additional 3/4 turn.
5.12.25 Check the hydraulic oil tank level. Add oil if needed.
Note: In the interests of environmental protection, place impermeable
sheeting and a container under the machine to collect the liquid which
drains off. Dispose of this liquid in accordance with environmental
protection legislation.
wc_gr002219
a
b
c
d
e
f
g