Operator`s manual

Maintenance RD 27
wc_tx000426gb.fm 56
5.11 Fuel System Water Separator
See Graphic: wc_gr002218
Drain fuel system water separator (f)
5.11.1 Open the engine hood.
5.11.2 Attach a rubber drain tube to the valve (e).
5.11.3 Turn valve (e) counterclockwise in order to open the valve.
5.11.4 Drain the water and the sediment into a suitable container.
Note: Collect, store and dispose of all used fluids in accordance with
current environmental protection regulations.
5.11.5 Close valve (e).
5.11.6 Remove the rubber drain tube.
Fuel system water separator element
5.11.7 Open the engine hood.
5.11.8 Turn valve (e) in a counterclockwise direction in order to drain the fuel.
Drain the fuel into a suitable container.
Note: Collect, store and dispose of all old fuel in accordance with
current environmental protection regulations.
5.11.9 Close valve (e).
5.11.10 Hold bowl (d) while you loosen the collar (c). Remove the bowl (d) and
the collar (c).
5.11.11 Loosen the collar (a). Remove the element (b).
Note: Dispose of used filters in accordance with environmental
protection legislation.
5.11.12 Clean the parts. Inspect the parts for damage. Replace the damaged
parts or replace the worn parts.
5.11.13 Clean the filter mounting base. All of the old seal must be removed.
5.11.14 Apply a light coat of diesel fuel to the seal of the new filter.
5.11.15 Install the new filter and tighten by hand. Tighten the collar (a).
5.11.16 Install the bowl (d) and tighten the collar (c).
5.11.17 Start the engine and check the fuel system for leaks.
5.11.18 Close the engine compartment.