Operator`s manual

Maintenance RD 27
wc_tx000426gb.fm 48
5.5 Inspecting the ROPS
Inspect the rollover protection structure (ROPS) for cracks. Inspect the
ROPS for any loose bolts or damaged bolts. Replace the damaged
bolts with original equipment parts only. Torque mounting bolts to
240Nm (177 ft.lbs.).
Inspect the locking pins for wear or damage.
Replace the ROPS if it is damaged. Do not straighten the ROPS or
repair the ROPS by welding reinforcement plates to the ROPS.