Operator`s manual

Operation RD 27
wc_tx000425gb.fm 42
4.23 Stopping the Engine
See graphic: wc_gr002312, wc_gr002311, wc_gr002229, and wc_gr002582
When you finish using the machine:
4.23.1 Stop the machine on a flat surface with a suitable load bearing
capacity.
4.23.2 Move the forward-reverse (f) lever to the neutral position.
4.23.3 Move the throttle lever to the low position (1).
CAUTION: Never stop the engine suddenly after a lengthy period of
running under heavy loading. Allow the engine to run at idling speed
for a few minutes before switching off. This avoids a sudden drop in
engine temperature when the engine is switched off.
4.23.4 Apply the parking brake (h).
4.23.5 Turn the key switch to “Position 0” (OFF).
4.23.6 Remove the ignition key before you leave the driver’s seat.
If the vehicle constitutes a hazard or obstacle to traffic when parked, it
should be marked with signs, lights, and other warnings.
If the machine must be parked on a sloping surface, chock the drums
with wedges to prevent any vehicle movement.
WARNING