Operator`s manual

RD 27 Operation
wc_tx000425gb.fm 39
4.21 Preliminary Checks
Before starting the machine, check the following items:
• Check the machine for obstructions and remove all obstructions
before operating.
• Place the articulated steering joint locking pin in the unlocked
position.
• Remove locks fom vandalism guard and hood.
• With the machine on a flat surface, open the hood, place retain-
ing bar in place to hold hood, and check the following items:
• Engine coolant level.
• Engine oil level.
• Hydraulic oil level.
• Diesel fuel level.
• Engine air filter indicator.
• Condition of oil cooler and radiator cooling fins.
• Check that there are no fluid leaks.
• Water level in tank.
• Ensure that the drum scrapers are clean.
• Ensure that regular maintenance operations have been carried
out.
• Before climbing onto the roller, walk round the machine and
check that everything is in order.
• Check that all handles, steps, and platforms are free of dirt, snow,
grease, fuel or anything else which might endanger operator
safety. Always keep the driver’s platform clean.
CAUTION: Top up lubricating and hydraulic oil levels using products
with the grades and specifications shown in the table of recommended
lubricants and oils in this manual. When doing so, use clean
containers, funnels, etc. to avoid contamination.
When climbing on and off the machine, maintain a three-point contact
with the steps and the handholds. Three-point contact can be two feet
and one hand. Three-point contact can also be one foot and two
hands.