Operator`s manual

Operation RD 27
wc_tx000425gb.fm 38
4.20 Operating on Slopes
See Graphic: wc_gr002529
When operating on slopes or hills, special care must be taken to
reduce the risk of personal injury or damage to the equipment. Always
operate the machine up and down hills rather than from side to side.
For safe operation and for protection of the engine, continuous duty
use should be restricted to front/rear slopes of 19° (35% grade) or less.
NEVER operate machine sideways on slopes. The machine may roll
over, even on stable ground.
WARNING
wc_gr002529
19˚
35%