Operator`s manual

Operation RD 27
wc_tx000425gb.fm 36
4.18 Panel Indicator Lights
See Graphic: wc_gr002315
Engine oil pressure warning light
This warning light (d) illuminates when the key switch is in the ON
position; it goes out once the engine has started.
CAUTION: If the light remains off with the key switch in the ON
position, check the bulb. Replace the bulb before using the machine.
If the light illuminates when the engine is running, it indicates that the
oil pressure is too low. Possible causes for the light to illuminate:
• Oil level is too low.
• Incorrect oil viscosity for the time of year.
• Fault in the oil circuit.
Top up oil level if necessary. Do not operate the machine if the light is
illuminated.
Engine high temperature warning light
This warning light (o) illuminates to indicate that the engine is
overheating.
CAUTION: If the light should illuminate, turn off the engine
immediately. Trace the cause of overheating and rectify the situation
before operating the machine.
Alternator warning light
This warning light (c) illuminates when the key switch is in the ON
position; it goes out once the engine has started.
CAUTION: If the light remains off with the ignition in the ON position,
check the bulb. If the light illuminates when the engine is running, stop
machine and check for a loose or broken belt, or an electrical problem.
Hydraulic oil temperature warning light
This warning light (e) illuminates to indicate that the hydraulic oil is too
hot.
CAUTION: If the hydraulic temperature warning light should illuminate,
turn off the engine immediately. Trace the cause of overheating and
rectify the situation before operating the machine.