Operator`s manual

RD 27 Operation

wc_tx000425gb.fm 27

4.8 Seat Adjustment

See graphic: wc_gr002234

The machine is equipped with an operator present system. This

system is part of the driver's seat and senses the weight of an operator

in the seat. If the operator is not sitting in the driver's seat, movement

of the roller stops. Machine movement cannot be restored until the

Forward/Reverse lever is returned to the neutral position.

The seat can be adjusted in three ways: tension, front to back, and side

to side (optional). Adjust the seat position and tension according to

working conditions and operator's weight.

• Use knob (a) for adjusting seat tension (turn from a minimum of

60 kg to a maximum of 120 kg).

• Use lever (b) to adjust the front-to-back distance from the driving

controls.

• Use pin (c) to set one of the three side-to-side position placement

holes (if so equipped).

wc_gr002234