Operator`s manual

RD 27 Operation
wc_tx000425gb.fm 25
4.6 Lighting Equipment (if equipped)
See Graphic: wc_gr002237 and wc_gr002313
• Headlights (a).
• Working light (b).
• Front turn signal lights/roading lights (c).
• Rear turn signal lights/roading lights (d).
When working in the dark or in bad visibility, use all the lights available.
Replace broken bulbs immediately. Only replace bulbs when
machined is turned off. Remember that your own safety and that of
others depends on your care and attention when operating this
machine.
•
The light switch controls power to the machine’s lights as follows:
Position O - all lights off
Position 1 - parking lights (roading lights) on
Position 2 - headlights and roading lights on
Position 3 - headlights, roading lights, and work light on
WARNING
wc_gr002313
P