Operator`s manual

Safety Information RD 27
wc_si000147gb.fm 8
2.3 Service Safety
Poorly maintained equipment can become a safety hazard! In order
for the equipment to operate safely and properly over a long period of
time, periodic maintenance and occasional repairs are necessary.
2.3.1 Some service procedures require that the machine’s battery be
disconnected. To reduce the risk of personal injury, read and
understand the service procedures before performing any service to
the machine.
2.3.2 All adjustments and repairs MUST be completed before operation.
NEVER operate the machine with a known problem or deficiency! All
repairs and adjustments should be completed by a qualified
technician.
2.3.3 DO NOT stand under the machine while it is being hoisted or moved.
2.3.4 DO NOT get onto the machine while it is being hoisted or moved.
2.3.5 DO NOT use the machine as a ladder. Use safe ladders and platforms
designed for this purpose.
2.3.6 DO NOT modify, weld or drill safety frames (ROPS) fitted as original
equipment. DO NOT loosen or remove bolts. DO NOT weld, drill or
modify a broken safety frame.
2.3.7 DO NOT attempt to open the radiator cap while the unit is running or
before the engine has cooled down. Severe burns may result!
2.3.8 DO NOT modify the equipment without the express written approval of
the manufacturer.
2.3.9 DO NOT attempt to clean or service the machine while it is running.
Rotating parts can cause severe injury.
2.3.10 DO NOT use gasoline or other types of fuels or flammable solvents to
clean parts, especially in enclosed areas. Fumes from fuels and
solvents can become explosive.
2.3.11 ALWAYS keep the area around the muffler free of debris such as
leaves, paper, cartons, etc. A hot muffler could ignite the debris and
start a fire.
2.3.12 ALWAYS replace worn or damaged components with spare parts
designed and recommended by Wacker Corporation.
2.3.13 ALWAYS keep the machine clean and labels legible. Replace all
missing and hard-to-read labels. Labels provide important operating
instructions and warn of dangers and hazards.
2.3.14 ALWAYS check all external fasteners at regular intervals.
2.3.15 ALWAYS turn engine off before performing maintenance or making
repairs.
WARNING