Product Manual

PT2A / PT3A / PT4A Foreword
wc_tx004592en.fm 5
Foreword
SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during installation,
operation, and maintenance of the machines.
Machine
identification
A nameplate listing the model number, item number, revision number, and serial
number is attached to this machine. The location of the nameplate is shown above.
Serial number
(S/N)
For future reference, record the serial number in the space provided below. You will
need the serial number when requesting parts or service for this machine.
Machine
documentation
 From this point forward in this documentation, Wacker Neuson Production
Americas LLC will be referred to as Wacker Neuson.
 Keep a copy of the Operator’s Manual with the machine at all times.
 For spare parts information, please see your Wacker Neuson Dealer, or visit
the Wacker Neuson website at http://www.wackerneuson.com/.
 When ordering parts or requesting service information, be prepared to provide
the machine model number, item number, revision number, and serial number.
Expectations
for
information in
this manual
 This manual provides information and procedures to safely operate and
maintain the above Wacker Neuson model(s). For your own safety and to
reduce the risk of injury, carefully read, understand, and observe all instructions
described in this manual.
 Wacker Neuson expressly reserves the right to make technical modifications,
even without notice, which improve the performance or safety standards of its
machines.
Machine Item Number
PT2A, PT2A(I) 5100042215, 5100042613
PT3A, PT3A(I) 5100042216, 5100042614
PT4A, PT4A(I) 5100042217, 5100042615, 5100042604
wc_gr014833
Serial Number: