Product Manual

wc_tx001998gb.fm

Maintenance PS(A)2 800 / PSW3 1500

5.8 Reassembly (PS / PSA)

1. Mount the V-ring (11) onto the outside of the shaft sleeve (10) as shown in the

drawing. When doing so, do not apply oil or other lubrication to the surface

where the V-ring contacts the shaft sleeve (a).

2. When replacing the wear plate (12), make sure the front and back are oriented

correctly. The raised portion should face the oil casing (13). Press the wear

plate firmly onto the surface.

3. Replace the V-ring and shaft sleeve as one piece.

4. Align the impeller keyway with the rotor shaft keyway and push the impeller (9)

onto the rotor shaft. Secure the impeller on the shaft with the washer (8),

lockwasher (7), and acorn nut (6). While keeping the impeller and shaft from

rotating, tighten the acorn nut.

5. Position volute (4) flush with oil housing. Assemble suction cover (3) and

strainer (2) and secure the assembly with the three bolts (1).

gr001205