Product Manual

wc_tx001998gb.fm

PS(A)2 800 / PSW3 1500 Maintenance

5.4 Lubrication Inspection and Changing Procedures

 Inspecting Lubricant

Remove the oil plug and tilt the pump to drain a small amount of lubricant. If the

lubricant is milky white or has water mixed in with it, the mechanical seal may be

faulty. In this case the pump will need to be disassembled and repaired.

 Replacing Lubricant

Remove the oil plug and drain all the lubricant, then replace it with the specified

amount.

Note: Worn lubricant and other waste products should be disposed of by a

qualified agent, in accord with applicable laws. The oil plug gasket should be

replaced each time the lubricant is inspected or changed.

Ref. Description Ref. Description

1. Oil inlet 3. Oil plug

2. Gasket 4. Allen wrench

Pump Model Lubricant Capacity

PS2 800 155 ml (5.2 fl. oz.)

PSA2 800

PSW3 1500 350 ml (11.8 fl. oz.)

gr001204