Product Manual

wc_tx001983gb.fm
21
PS(A)2 800 / PSW3 1500 Operation
Operation
Make sure no extraneous objects such as pins, nails or other metal objects are
sucked into the pump. These can damage the pump or cause it to malfunction, and
can result in electrical shock or electrical leakage.
When the pump is not used for an extended period, be sure to turn off the power
(circuit breaker, etc.). Deterioration of the insulation may lead to electrical leakage,
electrical shock, or fire.
In case of a power outage, turn off the power to the pump to avoid having it start
unexpectedly when the power is restored, presenting serious danger to people in
the vicinity.
The pump may become hot during operation. Do not touch an operating pump.
Allow the pump to cool before handling.
Pay careful attention to the water level while the pump is operating. Dry operation
may cause the pump to malfunction.
Note: See section “Operating Water Level” for the water level necessary for
operation.
If the protection system operates due to an overload or malfunction, causing the
pump to stop, first investigate and remove the cause before restarting.
WARNING
CAUTION