Repair manual

PS2 750 Repair

Repair.fm 87

—The other wire can remain attached.

10.Remove two screws (aa) along with two spacers (ac) from thermal

switch (ab).

11.Remove two screws (x), bearing cover (y) and spring washer (bh).

12.Remove four long screws (u) that secure stator (v) to bearing

housing (az).

13.Remove stator (v) with thermal switch (ab) and ground wire (t) still

attached and set aside.

14.Turn pump on its side.

15.Remove three nuts (ar), strainer (ap) and three stud bolts (aq)

along with metal suction cover (ao) and gasket (an).

wc_gr000456