Repair manual

Repair PS2 750

Repair.fm 86

6.4.2 Motor Disassembly, Inspection, Testing and

Reassembly

6.4.2.1 Motor Disassembly

Note: Motor disassembly requires disassembly of entire pump.

1. Remove oil.

2. Disassemble power supply. See Power Supply Disassembly on

page 80).

3. Label two blue wires (zz) connecting to capacitor. This aids

reassembly.

4. Remove screw (ad) and capacitor (k).

5. Remove two screws (af) and cover (ae).

6. Remove pin (ag) and spring washer (ah).

7. Remove top half of centrifugal switch (ai).

8. Remove two screws (r) that secures lower half of centrifugal switch

(w).

9. Remove screw (not shown) holding blue wire connector to lower

half of centrifugal switch.

wc_gr000452

wc_gr000455