Repair manual

PS2 400 Repair
Repair.fm 59
21.Properly align rubber gasket (m) over top of motor bracket (n).
Make sure knob located on under side of rubber gasket (m) is
aligned with hole in motor bracket (n). Press gasket flush to motor
bracket (n).
22.Reposition capacitor (o) inside two tangs of motor bracket (n).
Note: A thin piece of double-sided tape between motor bracket (n)
and capacitor (o) temporarily holds capacitor (o) in proper
position and eases reassembly.
23.Connect black, blue and red wire connections to capacitor (o).
wc_gr000439
o
m
n