Repair manual

Repair PS2 400

Repair.fm 56

See graphic wc_gr000605.

5. Center three-piece portion of mechanical seal (ad) on top of rubber

plug.

See graphic wc_gr000443.

6. Install rubber washer (rw) to top side of oil housing (ag).

See graphic wc_gr000607.

7. Apply clean pump oil to o-ring (ae) and lay into motor frame (t).Pick

up oil housing (ag). Turn it upside down, line up three mounting

holes and gently set in place.

See graphic wc_gr000445.

Note: The spring of mechanical seal lifts oil housing (ag) slightly

above motor frame (t).

wc_gr000605

wc_gr000443

wc_gr000607