Repair manual

Elementary Maintenance
Elem-Maintenance.fm 41
5. Elementary Maintenance
5.1 Inspection of Lubrication Oil
1. Drain the lubrication oil into a clean container and transfer to a
transparent container to check for deterioration or water leaking
into the oil.
2. Check the sealing system for replacement if the following
conditions exists:
—Oil volume is below 70% of correct volume.
—Excessive discoloration or deterioration.
—Water comprises over 5% of total oil capacity.
—Abrasive materials visible.
—Water leakage into the motor section through the seals.
5.1.1 Changing Lubrication Oil
1. Replace with lightweight, 32 Viscosity Turbine Oil or SAE 10W
Engine Oil. Do not reuse oil after one year’s use even if it appears
to be clean and clear.
—Use oil as recommended in volumes not to exceed 85 (±5%) of
total oil chamber capacity.
Oil Capacity
Capacity fl-oz ml
PS2 400, PS2 500, PSA2 500 5.4 fl-oz 160 ml
PS2 750 7.1 fl-oz 210 ml
PS3 1500, PS3 2200 9.1 fl-oz 270 ml
PS2 1503, PS3 1503, PS2 2203, PS3 2203 25.0 fl-oz 740 ml
PS2 3703, PS4 3703, PS4 3703 32.5 fl-oz 960 ml
PS3 5503, PS4 5503 37.2 fl-oz 1,100ml
PS4 7503HH, PS4 7503HF,
PS4 11003HH, PS4 11003HF
25.7 fl-oz 760 ml