Repair manual

Repair PS4 7503HH, PS4 7503HF, PS4 11003HH, PS4 11003HF

Repair.fm 180

8. Position plate (ac) on top of stator. Line up cutouts in plate with

protruding wires.

9. Gather loose wires and guide them through hole while at the same

time lowering cover housing. Align with upper bearing, being

careful not to damage spring washer (ab). Do not force.

10.Carefully lower housing cover into place.

Note: Cover housing and rotor assembly must be perpendicular for

the housing to slide into place.

Note: Position lift handle (an) to cover housing (ap). Obtain keyring/

warning plate combination and trap around one of the legs of

lift handle before securing to cover housing.

Note: If keyring/warning plate is damaged, illegible or missing,

replace it.

—PS4 7503HH & PS4 7503HF, assemble three bolts (ao), one bolt

(au), one lockwasher (av) and “L” bracket (aw) securing lift

handle and cover housing to motor frame.

—PS4 11003HH & PS4 11003HF, assemble six bolts (au),six

lockwashers (av) and “L” bracket (aw) securing lift handle and

cover housing to motor frame.

wc_gr000630