Repair manual

Repair PS2 3703, PS3 3703, PS4 3703, PS3 5503, PS4 5503

Repair.fm 164

6.7.3.1 Motor Reassembly

Note: If, upon inspection and testing, a pump component requires

replacement, use only original manufacturer’s replacement

cables complete with anti-wicking block assembly and

certified for submersible use.

Note: Use only new gaskets and o-rings when rebuilding pump.

1. Lay the bearing cover (bt) over the shaft of the rotor (bv).

2. Slide lower bearing (bs) onto shaft of rotor (bv) and secure with

locking ring (br).

See graphic wc_gr000698.

3. Install o-ring (bq) to bearing housing (bp).

4. Assemble seal (bx) to bearing housing (bp).

5. Take the assembled bearing housing and lay over rotor shaft.

See graphic wc_gr000699.

wc_gr000698

wc_gr000651