Repair manual

PS2 1503, PS3 1503, PS2 2203, PS3 2203 Repair
Repair.fm 131
PS2 2203
PS3 2203
6.6.2 Motor Disassembly, Inspection, Testing and
Reassembly
6.6.2.1 Motor Disassembly
Note: Motor disassembly for the PS2 1503, PS3 1503 and
PS2 2203 PS3 2203 requires disassembly of entire pump.
1. Lay pump on its side and remove oil plug and gasket. Rotate pump
so all oil can drain from oil housing. Slide gasket over oil plug and
screw oil plug back into oil housing during servicing.
2. Prior to working on pump, all electrical power supply circuits must
be disconnected.
Maximum head > 30.5m (100 ft)
Maximum volume > 500 ltr/min (132gpm)
Amperage @ 200V <
full load 9.3A
start 73A
Amperage @ 440V <
full load 4.7A
start 36A
Amperage @ 575V <
full load 3.5A
start 28A
Maximum head > 20.4m (67 ft)
Maximum volume > 500 ltr/min (132gpm)
Amperage @ 200V <
full load 9.3A
start 73A
Amperage @ 440V <
full load 4.7A
start 36A
Amperage @ 575V <
full load 3.5A
start 28A