Repair manual

ManualsBrandsWacker Neuson ManualsPower ToolsPS 2 500

131

132

133

134

135

136

137

138

139

140

Repair PS2 1503, PS3 1503, PS2 2203, PS3 2203

Repair.fm 130

18.If lift handle (c) was removed, obtain keyring/warning plate

combination and trap around one of the legs of lift handle before

securing to cover housing with two bolts (h).

Note: If keyring/warning plate is damaged, illegible or missing,

replace it.

19.Turn pump on its side and remove oil plug (op) and plug gasket

(pg).

20.Pour 270ml (9.1fl-oz) of clean oil into the oil housing.

Note: Use SAE 10W/20W oil, Turbine oil VG32 or equivalent.

21.Screw oil plug (op) with plug gasket (pg) into the oil housing and

tighten.

22.Pre-test pump to verify proper operation.

23.Performance test pump. Test results should be:

PS2 1503

PS3 1503

Maximum head > 21.5m (71ft)

Maximum volume > 430 ltr/min (114gpm)

Amperage @ 220V <

full load 6.1A

start 42A

Amperage @ 440V <

full load 3.1A

start 21A

Amperage @ 575V <

full load 2.3A

start 16A

Maximum head > 14.4m (47ft

Maximum volume > 670 ltr/min (177gpm)