Repair manual

PS2 1503, PS3 1503, PS2 2203, PS3 2203 Repair

Repair.fm 127

4. Inspect the sheath for cuts, gouges, cracking, hardening or

abrasive wear.

—Replace the power supply cable if the outer sheath is damaged

or exposing interior insulation or protective materials. No tape

repair is permitted.

6.6.1.3 Power Supply Testing

Air Test Cable

1. Air test the cable insulation for resistance using a Megger tester

between conductors.

—Replace power cable (x) if readings fall below 30 MΩ.

2. Water test the cable insulation for resistance using a water tank.

This testing method may detect minute insulation flaws that the air

test will not.

G = Green 1 = Coil

B = Black 2 = Circle Thermal Protector

W=White

R=Red

wc_gr000643