Repair manual

PS3 1500, PS3 2200 Repair

Repair.fm 113

—PS3 2200, separate the motor wires from the power cable wires.

19.Remove four bolts (c), lockwashers (d) and flat washers (e) that

secure housing cover (j) to motor bracket (not shown).

20.Lift housing cover (aq) off and remove o-ring (au).

21.Remove two wire connections going to capacitor (au).

22.Remove capacitor (o) for inspection and testing.

Note: To loosen screw (n), first gain access by removing two

screws (not visible) that secure terminal box (q) to cover (p)

and pull terminal box out of the way.

23.Using a marker, scribe a line where cover (p) and motor bracket

(mb) line up. Remove four screws (z) and cover (p).

24.Remove nut (bl), washer (bm) and upper half of centrifugal switch

(bn).

wc_gr000585

wc_gr000594