Repair manual

Repair PS3 1500, PS3 2200

Repair.fm 112

14.Remove three piece portion of mechanical seal (aq).

15.Turn pump upright and clean top of cover housing (j) thoroughly.

16.Coil up excess power cable (s).

17.Remove four bolts (k) and four lockwashers (l) that secure cable

casing (u) in place.

18.Pull power cable (s) up exposing the red, white and green wire

connections.

—PS3 1500, remove three outer shrink tubes and three inner

shrink tubes to access screw (xx) and nut (yy) connections.

—PS3 2200, remove three wire nuts (m).

—PS3 1500, separate the motor wires from the power cable wire

by removing screws (xx) and nuts (yy). Loosely assemble

screws and nuts to power cable wire connections to avoid

misplacing the hardware.

wc_gr000593