Repair manual

Repair PS3 1500, PS3 2200

Repair.fm 102

6.5.1.2 Power Supply Inspection

1. Measure the cable length. The specified cable length is 9.8m (32ft),

subject to user’s specific application requirements.

—Replace cable if measured length is less than 8m (26ft).

2. Inspect insulation materials of the power supply cable and wires for

cuts, cracking, hardening, abrasive wear or any other condition

where short circuit or water leaks are possible.

3. Inspect the power supply cable and wires for broken connectors.

—Replace the cable if continuity tests prove the conductors are

broken.

4. Inspect the sheath for cuts, gouges, cracking, hardening or

abrasive wear.

—Replace the power supply cable if the outer sheath is damaged

or exposing interior insulation or protective materials. No tape

repair is permitted.

5. Visually inspect capacitor (o). Replace part if there is damage to

insulation or any evidence of electrolyte leaking from capacitor.

1 = Bi-metal (to power supply)

2 = Protector

wc_gr000585