Operator`s manual

PS 2 500 / PS 2 750 / PSA 2 500 Operation

wc_tx001986gb.fm 23

4.2 Operating Water Level

Do not operate the pump below the C.W.L. (Continuous running

Water Level) indicated below. Failure to observe this condition may

result in damage to the pump, current leakage or electrical shock.

See Graphic: wc_gr001225

Operating Water Level (PS 2 500, PS 2 750).

Operating water level (PSA2 500 only)

Starting the Pump:

This pump starts when water reaches the electrodes on the level relay

unit, conducting current between them.

Note: The necessary water level to operate the pump is 115 mm

(4-½") from the bottom of the pump. To force start the pump for trial

operation, short-circuit the electrodes (a) with a screwdriver (b) as

illustrated. Please keep items that may clog the pump (such as wires,

nails, cords, etc.) away from it.

Pump Model C.W.L.

PS 2 500 50mm (2”)

PS 2 750 100mm (4”)

CAUTION

C.W.L

PS 2 500, PS 2 750

115 mm (4-1/2")

gr001225

PSA 2 500