Operator`s manual

Lifting and Transporting PS 2 500 / PS 2 750 / PSA 2 500

12 wc_tx001956gb.fm

2 Lifting and Transporting

Do not under any circumstances install or move the pump by

suspending it from the cable assembly. The cable may be damaged,

causing electrical leakage, shock, or fire.

When installing the pump, pay close attention to its center of gravity

and weight. If it is not lowered into place correctly, it may fall and be

damaged or cause injury.

When transporting the pump by hand, be sure to employ manpower

commensurate with the weight of the pump. To avoid back injury when

lifting the pump, bend the knees to pick it up rather than bending your

back only.

Avoid dropping the pump or other strong impact. Lift the pump by

holding it firmly with the hands or by attaching a rope or chain to the

handle.

Model PSA2 500—Do not lift or hang the pump by the level relay unit

(1). It will lead to damage and may cause leakage, electric shock, and

fire

See Graphic: wc_gr000259

WARNING

CAUTION

wc_gr000259