Product Manual

wc_tx001331gb_FM10.fm
27
PD2A / PD3A Operation
4.7 Starting
Requirements ■ Completed installation procedures
■ Engine owner’s manual read and understood
Procedure Perform the procedure below to start the machine.
1. Set the fuel valve lever (a) to the OPEN position (a
1
).
2. Set the choke lever (b) to the CLOSED position (b
1
). If the engine is warm, the
choke lever may be left in the OPEN position (b
2
).
3. Set the throttle lever (c) approximately 1/3 of the way to the “MAX.” position.
4. Turn the engine switch (d) to the ON position (d
1
).
5. Pull the starter rope until the engine starts.
6. Set the choke lever to the OPEN position as the engine warms.
7. Set the throttle to “MAX.” position to run the pump.