Product Manual

wc_tx001331gb_FM10.fm
25
PD2A / PD3A Operation
4.5 Before Installing the Pump
Requirements ■ API GL-5 rated gear oil
■ Machine off
Tasks Perform the tasks below before installing the pump.
1. Read the safety instructions at the beginning of this manual.
2. Place the pump on a firm, flat, level surface.
3. Check fuel level. Add fuel as needed.
4. Check engine oil level. Add engine oil as needed.
5. Check condition of air filter. Replace the air filter if needed.
6. Fill the pump’s gearbox with oil.
a.Remove the fill plug (a).
b.Remove the level plug (b).
c. Slowly pour gear oil into the fill hole until it comes out of the level hole.
d.Re-install the fill and level plugs.
Result The pump is now ready to be installed.