Product Manual

wc_si000391gb_FM10.fm
12
Safety Information PD2 / PD3 / PD2A / PD3A
Operating
guidelines
When operating this machine:
■ Ensure that the machine is on a firm, level surface and that it will not tip, roll,
slide, or fall while operating.
When operating this machine:
■ Do not pump volatile, flammable, or low-flash-point fluids.
■ Do not change hoses while the engine is running.
■ Do not attempt to move the machine while the engine is running.
Personal
Protective
Equipment
(PPE)
Wear the following Personal Protective Equipment (PPE) while operating this
machine:
■ Close-fitting work clothes that do not hinder movement
■ Safety glasses with side shields
■ Hearing protection
■ Safety-toed footwear
1.4 Service Safety
Service
training
Before servicing or maintaining the machine:
■ Read and understand the instructions contained in all manuals delivered with
the machine.
■ Familiarize yourself with the location and proper use of all controls and safety
devices.
■ Only trained personnel should troubleshoot or repair problems occurring with
the machine.
■ Contact Wacker Neuson for additional training if necessary.
When servicing or maintaining this machine:
■ Do not allow improperly trained people to service or maintain the machine.
Personnel servicing or maintaining the machine must be familiar with the
associated potential risks and hazards.
Precautions Follow the precautions below when servicing or maintaining the machine.
■ Read and understand the service procedures before performing any service to
the machine.
■ All adjustments and repairs must be completed before operation. Do not
operate the machine with a known problem or deficiency.
■ All repairs and adjustments shall be completed by a qualified technician.
■ Turn off the machine before performing maintenance or making repairs.