Product Manual

wc_tx004457en.fm
82
General Maintenance LTV
7.4 Inspecting the Machine
When Daily
Overview Inspect the machine before each use. A thorough inspection will help to identify
mechanical faults or potentially unsafe operating conditions. Correct these
problems before operating the machine.
External
inspection
Perform an external inspection of the machine. Check for:
 External damage (dents, cracks, broken door latches, etc.)
 Loose or missing fasteners
 Loose or missing parts
 Cut or worn insulation on electrical cords
 Damaged light fixtures or lamps
 Fluid leaks
 Restricted air flow at the engine exhaust
 Problems with the trailer (if equipped)—see Maintaining the Trailer
Internal
inspection
Open the access doors on both sides of the machine. Check for:
 Damage to control panels, switches, or convenience receptacles
 Loose or missing fasteners
 Loose or missing parts
 Loose or damaged hoses
 Fluid leaks
 Rags, containers, or other debris inside the cabinet
7.5 Maintaining the Trailer
Tires ■ Keep the tires inflated to the proper pressure as shown on the tire sidewall.
■ Check tire tread periodically for wear.
■ Replace the tires as required.
Wheels ■ Check that the lug nuts holding the wheels are tight.
■ Replace any missing lug nuts immediately.
Axle Hubs ■ Grease the axle hubs using a good wheel-bearing grease.