Product Manual

wc_tx004431en.fm

Operation LTV

Continued from the previous page.

Alarm and Shutdown limits

* Engine oil service interval decreases when not using ultra low sulfur diesel. Refer to the engine

manual.

5.7 Resetting the Maintenance Timers—DeepSea

Background

The maintenance timers are preset on the controller. When the timer expires, the

alarm will display in the upper right corner of the screen. The maintenance timers

are preset as follows:

■ Oil change interval: 1000 hours (LTV4K / 6L / 6K 60 Hz / 8K)

■ Oil change interval: 750 hours (LTV6K 50 Hz)

■ Air filter change interval: 250 hours

■ Fuel filter change interval: 500 hours

Procedure

After the required maintenance has been completed, perform the following

procedure to reset a maintenance timer.

1. Use the up and down arrows (a) to navigate to the applicable screen.

2. Press and hold the “Stop” button (b) for 10 seconds. The timer will reset.

Variable Normal Warning Shutdown To Reset

Overspeed 60 Hz 63 Hz 66 Hz Press “Stop”.

Underspeed 60 Hz 57 Hz 55 Hz Press “Stop”.

Overcrank — — After 3 attempts Press “Stop”.

Time to maintain*:

■ Oil

■ Air

■ Fuel

1000 hours

0 hours —

Navigate to the applicable

maintenance screen and press and

hold “Stop” for 10 seconds.

250 hours

500 hours

wc_gr012367