Product Manual

wc_tx004430en.fm

Machine Setup LTV

Continued from the previous page.

Aiming Left or Right

1. Grasp the light fixture and aim it to the left or right. If necessary, loosen the

bracket nut (c) to allow movement of the fixture.

NOTICE: Do not loosen the nuts on the light fixture (b). Damage to the light fixture

may occur.

2. If loosened, tighten the bracket nut (c) when the light is aimed properly.

Note: The bracket nut should be only tight enough so that slight resistance is

present when aiming the fixture.

3. Repeat steps 1 and 2 for each remaining light fixture, if desired.

wc_gr013747