Product Manual

wc_tx004430en.fm

LTV Machine Setup

4.6 Aiming the Lights—Vertical Mast Light Towers

Overview

■ Each individual light fixture can be independently aimed up, down, left, or right.

There are four total light fixtures on each machine.

■ This procedure is not for rotating the lights as a single unit while the tower is

raised. This procedure requires the tower to be lowered and the engine

stopped. To rotate the lights, see Rotating the Lights.

Requirements

Before adjusting the lights, make sure that the following conditions have been met:

■ Engine is stopped

■ Tower is completely lowered

■ Lights are cool to the touch

Aiming the

light fixtures

Aiming Up or Down

Perform the procedure below to aim an individual light fixture up or down.

1. Grasp the light fixture (a) and aim it up or down.

NOTICE: Do not loosen the nuts on the light fixture (b). Damage to the light fixture

may occur.

2. Repeat step 1 for each remaining light fixture, if desired.

This procedure continues on the next page.

wc_gr013746