Product Manual

wc_si001039en.fm

LTV Labels

b See Operator’s Manual for light fixture information and troubleshooting.

BEFORE STARTING THE ENGINE:

1. Check levels of:

■ Engine oil

■ Fuel

■ Coolant

2. Move the circuit breakers to the OFF position.

TO START THE ENGINE:

1. On the engine control panel, turn the key switch to the PREHEAT position; the indicator light will

illuminate during preheating.

2. When the PREHEAT indicator light goes out, turn the key switch to the START position for a

maximum of 15 seconds.

3. When the engine is running, move the circuit breakers to the ON position.

TO SHUT DOWN THE MACHINE:

1. Move the circuit breakers to the OFF position.

2. Turn the key switch to the OFF position to stop the engine.

cNOTICE

Lifting point

d Light cover

e, f Fork lift pocket

Tie-down point

g Insert jack locking pin before extending jack.

5100029813

5100031248

177123