Product Manual

wc_tx004503en.fm
137
Power winch Appendix I
16.9 Installing the Power Winch
Materials
needed
 Power winch
 Hardware bag 7
Installing the
power winch
Perform the procedure below to install the power winch.
1. Remove the cover (a) from the power winch (b).
2. Fasten the power winch to the mast (c) with the hardware from bag 7 as shown
in the illustration:
 Three M12 x 30 screws (d)
 Six B13 flat washers (e)
 Three M12 lock nuts (f)
3. Tighten the screws to a torque of 48 Nm (35 ft. lb.).
This procedure continues on the next page.
wc_gr014399
a
b
d
c
e
e
f