Product Manual

wc_tx004503en.fm
129
Fenders Appendix I
16.3 Installing the Fenders
Materials
needed
 Two fenders
 Hardware bag 2
Installing the
fenders
Perform the procedure below to install the fenders.
1. Locate the two fenders (a) and hardware bag 2.
2. Align each fender as shown in the illustration.
3. Install both fenders on the light tower using the following hardware from bag 2:
 Eight flat washers (b)
 Eight M8 x 25 screws (c)
4. Tighten the M8 x 25 screws to a torque of 16 Nm (11.5 ft. lb.).
wc_gr014360
b
a c